Advertenties
Beschikbare talen
Beschikbare talen
LIPROTEC
8. Cover the screw holes with the self-adhesive caps pro-
vided.
> The wall bracket is now attached to the wall.
Fastening the wall bracket with screws
1. Make sure that the section of the wall you wish to attach
the bracket to is flat and suitable for a drilling depth of
40 mm.
2. Mark the locations of the drilled holes, one above the oth-
er and 95 mm apart.
3. Use a 5-mm drill bit to drill holes at the marked locations
(drilling depth: 40 mm).
4. Push the wall plugs provided into the drilled holes.
5. Place the wall bracket against the wall with the arrow
pointing upwards and screw in the screws provided.
6. Tighten the screws hand-tight using a Phillips screwdriver.
7. Cover the screw heads with the self-adhesive caps pro-
vided.
> The wall bracket is now attached to the wall.
EN
33
Advertenties
