Advertenties
Beschikbare talen
Beschikbare talen
LIPROTEC
Adding Bluetooth mesh receivers to a group
1. Disconnect the mains power supply to the Bluetooth mesh
receiver that you want to add to a group. To do this, pull
the power supply unit out of the mains socket.
2. Reconnect this Bluetooth mesh receiver to the mains sup-
ply (plug it into the socket).
3. Within 20 s, press the
control at the same time.
4. Press one of the buttons 1–4. This button is the number
of the group to which the Bluetooth mesh receiver is now
added.
> All LED modules connected to the Bluetooth mesh
receiver flash briefly three times. The Bluetooth mesh
receiver has been added to the selected group.
Removing Bluetooth mesh receivers from a group
1. Disconnect the mains power supply to the Bluetooth mesh
receiver that you want to remove from a group. To do this,
pull the power supply unit out of the mains socket.
2. Reconnect this Bluetooth mesh receiver's power supply to
the mains (plug it into the socket).
3. Within 20 s, press the
control at the same time.
4. Within 20 s, press the
control.
> All LED modules connected to the Bluetooth mesh
receiver flash briefly three times. The Bluetooth mesh
receiver has been removed from the group.
and + buttons on the remote
and + buttons on the remote
button on the Bluetooth remote
EN
35
Advertenties
