Assembly; First Use - UNITED OFFICE UAV 300 A1 Beknopte Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor UAV 300 A1:
- Gebruiksaanwijzing en veiligheidsinstructies (60 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Assembly
WARNING! – RISK OF INJURY!
►
Do not connect the appliance to a power socket during assembly .
►
The cutting blades in the cutter attachment
sharp . Take extreme care when assembling the appliance .
♦
Place the small waste collector
push the small waste collector
waste collector bin
Fig . 1
♦
Hold the cutter attachment
and position it over the large waste collector
points backwards and the viewing window
points forwards (see fig . 2) .
NOTE
►
The cutter attachment
tor
w
►
The appliance cannot be used until the cutting attachment
seated on the large waste collector
First use
NOTE
►
Make sure the REV/OFF/AUTO/FWD switch
before plugging the appliance into the power socket .
►
Every shredder is tested for functionality after manufacture . It is possible
that you may find paper residue in the cutting blades .
♦
Insert the plug
■
6
│
GB │ IE
until it is fully engaged (see fig . 1) .
w
6
must sit upright and firmly on the large waste collec-
6
. Otherwise, the appliance will not start!
into a mains power socket .
1
of the appliance are very
6
in the large waste collector
0
down along the guide rails in the large
0
Fig . 2
by the two integrated carrying recesses
so that the power cable
w
in the large waste collector
q
and the safety switch
w
is in the OFF position
3
. To do this,
w
8
1
w
is correctly
6
deactivated .
7
UAV 300 A1
Advertenties
Hoofdstukken
Inhoudsopgave
