Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Step 7:
Installation of the computer (30) at handrail (29) and drink
bottle holder (56) at support (24).
1. Push the ends of the sensor cable (68) (projecting from the sup-
port (24)) and sensor wire (31) (from handrail (29)) together
2. Insert the necessary batteries (2xMignon AA 1.5V) in the com-
puter. (Batteries for the computer are not included in this item.
Please buy them at your located market.)
3. Place the computer (30) on the computer bracket at the middle
of the handrail (29) and align the holes in the computer with the
holes in the bracket.
4. Screw the screws (49) with washers (51) through the holes and
tighten firmly.
5. Plug the end of the sensor wire of handrail (31) into the associ-
ated socket of the computer (30).
6. Insert the plug of the hand pulse (14) in the likewise correspon-
ding socket of the computer (30).
7. Put the bottle holder (56) at the handlebar support (24); fix it with
two screws (67) at appropriate position and insert the bottle (55)
into the bottle holder (67).
8. Place the handle cover (27) onto the screw connection of hand
rail (29).
Step 8:
Checks
1. Check the correct installation and function of all screwed and
plug connections.
2. When everything is in order, familiarise yourself with the machi-
ne at a low resistance setting.
Note:
Please keep the tool set and the instructions in a safe place as
these may be required for repairs or spare parts orders becoming
necessary later.
22
Advertenties
Inhoudsopgave
