Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Step 5:
Installation of the handrail (29) on the left and right supports
(24+33).
1. Put one curved washer 8//20 (60) on each screw M8x45 (13).
2. Place the hand rail (29) to the upper ends of the left and right
supports (24+33) so that the holes are align with the threat ho-
les in supports (24+33).
3. Push the screws (13) with washers (60) through the holes and
screw in firmly.
4. Push the ends of the sensor connection cable 1 (68) (projecting
from the right support (24)) and sensor connection cable 2 (31)
(from handrail (29)) together.
Step 6:
Installation of Walking sticks (74) at supports (24+33).
1. Place the screws M10x55 (76), washers 10//20 (77) and nuts
M10 (78) beside the foot (23).
2. Put the walking sticks (74) with walking stick holder (75) into ap-
propriate holder at the supports (24+33) so that the holes align.
3. Push the screws (76) through the holes and put on each screw
end one washer (77) and a nut (78). Screw it tightly, so that the
walking sticks can move in an easy way.
4. Finally, cover the screw head (76) with a screw cap (80).
21
Advertenties
Inhoudsopgave
