Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Translation of the original instructions
Do not leave a charging battery unattended for a long time
Acid projection hazard!
• Wear safety goggles and protective gloves.
• If your eyes or skin come into contact with battery acid, rinse
the affected part of the body with plenty of water and seek
immediate medical assistance.
Connection / disconnection:
• Disconnect the power supply before connecting/disconnecting
the device to/from the battery
• The terminal of the battery that is not connected to the car
frame must be connected first. The other connection must be
made on the car frame, far from the battery and the fuel line.
The battery charger must be connected to the power supply
network.
• After the charging process, disconnect the battery charger from
the power supply network and remove the connector from the
car frame and then the connector from the battery, in this order.
Connection:
• This device must be connected to an earthed power supply.
• This equipment is intended for industrial environments (class
A) and not for residential sites where the electric current is
supplied by the public low-voltage power supply network.
There may be potential difficulties in ensuring electromagnetic
680E and
compatibility on these sites, because of the conducted interfer-
980E only
ences, as well as radiated radioelectrical frequency.
• This product does not comply with IEC 61000-3-12 and is in-
tended to be connected to private low voltage networks which
are connected to public supply network only at the medium
and high voltage level. If connected to a public low-voltage
supply network, it is the responsibility of the installer or user
680E and
of the equipment to ensure, by consulting the operator of the
980E only
electrical distribution network, that the hardware can be con-
nected.
Maintenance:
• If the power supply cable is damaged, it must be replaced by the
manufacturer, its service agent or an equally qualified person.
• Service should be performed by a qualified person.
• Warning! Always remove the power plug from the wall socket
before carrying out any work on the device.
• If the internal fuse is blown, it must be replaced by the manu-
facturer, its after-sales service or an equally qualified person.
STARTIUM 330E / 480E / 680E / 980E
EN
13
Advertenties
Inhoudsopgave
