Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
on the product, the product starts automatically. When
you stop the equipment, the product operates for
approximately 10 seconds to empty the hose and then
stops.
Airflow warning system
The airflow in the suction hose must be more than 20
m/s (66 ft/s).
For the minimum airflow with the selected hose diameter
refer to the table.
Airflow alarm levels
mm
inch
5
21
/
6
27
1
32
1¼
38
1 ½
42
1 ⅔
51
2
63
2 ½
76
3
Note:
If the airflow is less than 20 m/s (66 ft/s), the
sound alarm and the warning symbol comes on. Refer to
Warnings on the control panel (DE 110 H/DE 120 H) on
page 20 .
To select the hose nozzle diameter
Note:
If you do not select the correct hose diameter,
the airflow warning system will come on.
When you start the product, the last selected hose
diameter is automatically selected.
1979 - 001 - 23.02.2023
3
m
/h
CFM
25
15
41
24
58
34
82
48
100
59
147
87
224
132
327
192
•
Push the button to select the correct hose diameter.
The green LED tells which diameter you have
selected.
38 1
42 1
51 2
63 2
76 3
To start and stop DE 110 SH
Note:
Wait for 5 seconds after you start the product
to operate with full suction. The suction is not at full
capacity directly at start.
1. Make sure that the frequency and voltage shown on
the rating plate agree with the power supply.
2. Make sure that the On/Off switch is set to the "0"
position.
3. Connect the product to an applicable power socket.
4. Push the On/Off switch.
a) Push "I" to start the product.
b) Push "II" for automatic start. Refer to
start function (Only 230V DE 110 SH and DE 110
H) on page 10 .
5. To stop the product, set the On/Off switch to "0".
6. Disconnect the product from the power socket.
To start and stop DE 110 H/DE 120 H
Note:
Wait for 5 seconds after you start the product
to operate with full suction. The suction is not at full
capacity directly at start.
1/2
2/3
1/2
Automatic
11
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
