Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2. Turn the knob (A) at the rear of the floor nozzle
to adjust the floor nozzle wheels. Different surfaces
and different types of dust and materials make it
necessary to adjust the wheels to get the best
performance.
To lock and unlock the transport
wheels
For operation on a surface with a slope it is necessary to
lock the transport wheels.
WARNING:
must be clean and without dust for safe
operations. Refer to
on page 15 .
1. Hold the product in a stationary and safe position.
2. Push down the wheel brake on each side to lock the
wheels.
Note:
DE 110 SH/DE 110 H has only 1 wheel
brake.
10
A
Wheels and bearings
Maintenance schedule
3. Pull up the wheel brakes to unlock the wheels.
Functions of the control panel
The control panel controls and monitors important
functions and setups of the product. Refer to
on the control panel (DE 110 H/DE 120 H) on page 20
to find solutions for the warnings.
1
6
1. The prefilter is clogged. Refer to
particles from the prefilter during operation on page
12 .
2. The HEPA filter is clogged, damaged or missing.
Warnings on the control panel (DE 110
Refer to
H/DE 120 H) on page 20 .
3. Warning. Refer to
Warnings on the control panel (DE
110 H/DE 120 H) on page 20 .
®
4. Bluetooth
connection.
5. Diameter change function for hose, refer to
the hose nozzle diameter on page 11
6. Automatic start, refer to
(Only 230V DE 110 SH and DE 110 H) on page 10
7. e-Flow button, refer to
8. On/Off button
e-Flow function
The product has an e-Flow function. This function
automatically adjusts the airflow to the workload for
optimal performance. The product always starts with the
last settings used.
Functions of the control panel on page 10 to
Refer to
engage or disengage the function.
Automatic start function (Only 230V DE 110
SH and DE 110 H)
The product can be used to collect dust from equipment
such as a grinder or power cutter. When you start
the equipment that is connected to the electrical outlet
Warnings
2
3
4
5
7
8
To remove dust
To select
Automatic start function
e-Flow function on page 10
1979 - 001 - 23.02.2023
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
