Download Inhoudsopgave Inhoud Print deze pagina
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

8. Common faults

Problem code
A、The power is not connected or the
power is not turned on
B、Safety locks are not in place
System does not
work
C、The controller or console is not
powered on
D、Poor line contact
A、Safety lock dropped
Suddenly stop in
normal condition
B、system error
Keys failure
KEY INVALID
A、The communication cable is in poor
contact
E-01
B、Defective console
C、Defective controller
A、Defective Motor cable and motor
B、The motor cable is improperly
E-02
connected to the controller or the
controller is improperly connected
A、The photoelectric sensor is not
installed correctly
B、Poor photoelectric sensor
E-03
C、Photoelectric sensor dirty or poor
first contact
D、Defective controller
A、Controller damaged
E-05
B、Motor damaged
C、mechanical failure
The console is not detecting the safety
lock signal
E-07
A、The grip wire is not inserted in place
or the grip wire is not good
No heart rate
B、Electronic system circuit fault
A、LED digital tube or screen is bad
console incomplete
or missing lines
B、system failure
Possible reasons
Connect the power supply, or turn the power switch to the "NO" position
Put the safety lock in the correct position
Replace the controller or console
Check system input and output and communication lines
Reinstall the safety lock
Ask the repairman to deal with it
2、Replace the key board and keyboard cable
2, replace the motherboard
3, replace the console
Reconnect the communication cable and check whether the port is
properly inserted or replace the communication cable.
Change the console
Change the controller
Change the motor
Check and reconnect or replace the controller
Check and reconnect
Replacement of photosensor
Check and reconnect/clean light sensor
Change the controller
Replace the controller
Replace the motor
Check the running oil or drum for blockage
2、check whether the safety lock is put in place;
2. Reinstall the safety lock mechanism;
3. Replace the electronic watch
Check and connect or replace the grip cable
Change the console
Replace the mainboard or screen
Change the console
31
Solution

Advertenties

Inhoudsopgave
loading

Gerelateerde Producten voor Senz Sports M7000

Inhoudsopgave