Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4.10
In the motor running, press "STOP" key, the motor will slow down until it stops smoothly, all the
settings will be restored to the default state.
4.11
In the motor running, press "
4.12
In any state, pull off the safety lock, the screen displays "E-07", and accompanied by a tone, the
treadmill stops running.
4.13
The control system at any time in the safety monitoring, as long as the discovery of anomalies,
the treadmill will be emergency stopped, the screen displays abnormal information prompts,
accompanied by beeps; .
4.14
When the abnormal information is displayed on the screen, press STOP. The system clears the
displayed information one time.
4.15 BMI test method: press the "PROG" key to select the program BMI, press the "MODE" key to select
the project serial number. press the "＋" and "-" keys to set the parameters.
➢ F1 (sex): defined as gender. Parameter range is 1~2. 1 defined as male, 2 defined as female.
Default 1.
➢ F2 (Age): defined as age. Parmeter range is 1~99 years old. Default 25 years old.
➢ F3 (Height): defined as height. Parameter range is 100~220cm. Default is 170cm.
➢ F4 (Weight): defined as body weight. Parameter range is 20~150kg. Default is 70kg.
➢
F5 (BMI): indicates the completion of parameter settings, enter the BMI test state, please hold both
hands to the left and right handles of the heart rate sensing piece, wait for 4 seconds, the
parameter display window will show the test person's body fat rate (BMI).
5 . ERP transfer function
The system starts in ERP mode by default. When the treadmill is not operated, it will enter hibernation
state in about 4 and a half minutes to save power consumption. Press any key to wake up the system.
In standby MODE, hold down the mode key for 3S to display '2222' to cancel the ERP function, and
hold down the mode key for 3S to display '1111' to return to ERP mode.
6 . Imperial conversion instructions
1) After unplugging the safety lock, press the "PROGRAM" and "MODE" keys at the same time, the
display will show 0.6, which means the conversion from kilometers to miles.
2) After unplugging the safety lock, press the "PROGRAM" and "MODE" keys at the same time, the
display will display 1.0, indicating that miles are converted to kilometers.
","
"key or" QUICK INCLINE "to adjust the treadmill slope;
26
Advertenties
Inhoudsopgave
