Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2. Safety key function description:
The safety key is composed of a touch switch, a clothespin and a nylon rope, which can prevent the
emergency shutdown. In any state, as long as the safety lock is out of position, the treadmill stops
running, the console keyboard is forbidden to operate, and the screen displays "E-07", accompanied
by a prompt sound. Each time you place the security lock, the screen will display for 2 seconds and
then enter the default working state of the system.
3. User program
USER has three USER1~USER3. In USER mode, users can access or set their own sports program,
press "PROG" key to adjust to "USER1~USER3", then press "mode" key to set or press START key to
start sports. Press the "MODE" key to set the 10 sections of speed and ascension of your own program.
After setting, the user press "START" to start the treadmill. The user's program will be saved and can
be used directly next time.
4 . Operation Instruction
4.1 Insert the power cord plug into the 10A power socket with safety ground, turn on the power switch,
the console screen is fully displayed with a prompt sound, then identify the safety key.
4.2 Place the safety key in the position on the console and clip the clothespin to the clothes on the
chest. The screen is fully displayed for 2 seconds then enters the default working state: all counters
are cleared to zero, the set value is reset, the treadmill is in the positive timing mode of manual
program P0.
4.3 Press "PROG" key to select a program: P01~P36, U01,U02,U03, BMI.
4.4 "P0" is a user-defined program, press "MODE" key to select four training modes, the training speed
and slope are set by the user. Default: Speed 1.0KM/H, slope 0 section.
Training mode 1: positive counting time, time, distance, calories are positive counting, close the
setting function.
Training mode 2: countdown time, setup state, time window flashing, press "+", "-" key to modify
the set value, set range: 5-99 minutes, default value: 30:00.
Training mode 3: countdown distance, set the state, the distance window flashes, press "＋", "-"
key to modify the set value, set the range: 1.0-99.0 KM, the default value: 1KM;
Training mode 4: reverse calorie, set state, calorie window flashes, press "＋", "-" key to modify
the set value, set range: 20-990CAL, default value: 50CAL.
4.5 "P01-P36" for the system setup program, only trained in the countdown mode, under the setting
state, the time window flashes, press "＋", "-" key to modify the set value, press the "MODE" key to
reset to the default value, set the range: 5-99MIN, the default value: 30:00.
4.6 After setting the training mode, press "START" key, the screen starts to display 5 seconds
countdown with 5 beeps, after the countdown is 1, the treadmill starts gently, accelerates slowly to
the displayed speed, and then runs smoothly at constant speed.
4.7 In the running state, press "＋", "-" key or "QUICK SPEED" key to adjust the speed of the treadmill.
4.8 In P1-P36, the speed of each program is divided into 10 segments, each period is equally divided
according to the set time. The speed adjusted by key is only valid in the current segment, and three
beeps will be sent three seconds in advance when the segment is converted to the other segment.
The motor stops automatically when the program runs full of 10 segments, with a "beep".
4.9 In running mode, press "START" key, the motor will change between the two states of suspension
and running. Restart in the paused state, the recorded running data and process stay the same.
25
Advertenties
Inhoudsopgave
