Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
26 Progress
To see the remaining time: set the
cooking zone with
cooking zone starts to flash quickly. The
display shows the remaining time.
To deactivate the function: set the
cooking zone with
remaining time counts back to 00. The
indicator of the cooking zone goes out.
When the time comes to an
end, the sound operates and 00
flashes. The cooking zone
deactivates.
To stop the sound: touch
Minute Minder
You can use this function as a Minute
Minder when the hob is activated and the
cooking zones do not operate. The heat
setting display shows
To activate the function: touch
Touch
or
of the timer to set the time.
When the time comes to an end, the sound
operates and 00 flashes.
To stop the sound: touch
The function has no effect on
the operation of the cooking
zones.
Lock
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
Set the heat setting first.
To activate the function: touch
comes on for 4 seconds. The Timer stays
on.
To deactivate the function: touch
The previous heat setting comes on.
When you deactivate the hob,
you also deactivate this function.
. The indicator of the
and touch
. The
.
.
.
.
.
.
The Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: activate the hob
with
. Do not set the heat setting. Touch
for 4 seconds.
the hob with
.
To deactivate the function: activate the
hob with
. Do not set the heat setting.
Touch
for 4 seconds.
Deactivate the hob with
To override the function for only one
cooking time: activate the hob with
comes on. Touch
the heat setting in 10 seconds. You can
operate the hob. When you deactivate the
hob with
the function operates again.
Power management function
• Cooking zones are grouped according
to the location and number of the
phases in the hob. See the illustration.
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power between
cooking zones connected to the same
phase.
• The function activates when the total
electricity loading of the cooking zones
connected to a single phase exceeds
3700 W.
• The function decreases the power to the
other cooking zones connected to the
same phase.
• The heat setting display of the reduced
zones changes between two levels.
comes on. Deactivate
comes on.
.
.
for 4 seconds. Set
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
