Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Depending on the method of working,
o
tighten the handle on to the handle thread
on the left
, right (fig. A) or top
[
7 ]
product.
˜ Assemble/set protective
cover/demounting (fig. D)
NOTE
If the protective cover
u
the position illustrated in fig. D j, push
the whole protective cover against the
product and turn it at the same time.
Adjust the protective cover such that any
o
sparks or detached parts cannot hit either
the user or any bystanders.
The protective cover must also be
o
positioned such that the sparks cannot
ignite combustible parts, including those in
the surroundings.
Demounting the grinding disc
1. Press the spindle lock button
2. Turn the mounting spindle
spindle lock fixed the mounting spindle.
Keep and continue to hold down the
spindle lock button.
3. Release the clamping nut
the chuck key
[
]
the spindle lock button.
4. Take off the clamping nut, the mounting
flange
(fig. B) and cutting disc from the
[
]
mounting spindle.
Attaching the protective cover
5. Put the protective cover
such that the open side is facing back
towards the product.
The teeth on the protective cover and on the
product must mesh together (see fig. D j).
6. Push the protective cover towards the
product to turn it (see fig. D k).
of the
[
2 ]
is engaged in
[
9 ]
(fig. A).
[
]
until the
[
]
(fig. B) with
[
]
(fig. A). You can release
onto the product
[
9 ]
7. Fasten the screw
[
cover by pressing it into the flute of the
product's teeth.
8. Turn the protective cover into the working
position. The closed side of the protective
cover must always face the operator.
9. Readjust the position of the protective
cover if you find during use that it does not
provide optimum protection.
Removing the protective cover
10. Take off the protective cover
removing the screw
an object such as a small screwdriver (see
fig. D l).
For simple removal, turn the protective
cover only after taking off the screw to the
position shown in the detail illustration in
fig. D j.
˜ Fitting the attachment to/
removing the attachment
from the protective cover
(fig. E)
Fitting the attachment
1. Fit the attachment for the protective
cover
, with the side on which the
[
]
running direction is indicated by an arrow,
onto the protective cover
2. Push the attachment onto the protective
cover until it clicks into place.
Removing the attachment
1. Release the attachment for the protective
cover
by pushing the notch
[
]
from the protective cover
2. Unscrew the attachment from the protective
cover.
to secure the protective
]
by
[
9 ]
with the help of
[
]
.
9 ]
[
away
[
]
.
[
9 ]
GB/IE/NI
17
Advertenties
Hoofdstukken
Inhoudsopgave
