Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
NOTE
This product produces an electromagnetic
u
field during operation! This field may
under some circumstances interfere with
active or passive medical implants! To
reduce the risk of serious or fatal injury,
we recommend persons with medical
implants to consult their doctor and the
medical implant manufacturer before
operating this product!
˜ Practical tips
m
WARNING!
When selecting the tool, ensure that its
u
specified permissible rotation speed is
at least as high as the maximum rotation
speed specified on the product.
When selecting the disc, pay attention to
u
the maximum permissible diameter and
the maximum permissible thickness.
Pay attention to the thread size M14
u
when selecting the brush.
˜ Scrubbing wheels (fig. H)
m
WARNING!
Never use a cutting wheel for scrubbing!
u
The product must only be operated with
u
the protective cover mounted when the
scrubbing wheel is used.
Fit the protective cover
o
wheels, see "Fitting/adjusting/removing the
protective cover".
Exert only moderate pressure on the
o
workpiece. Move the product evenly back
and forth.
A working angle of 30° to 40° achieves
o
the best results for scrub grinding.
16 GB/IE/NI
for the scrubbing
9 ]
[
˜ Cutting disc (fig. G)
m
WARNING!
Never use a scrubbing wheel for cutting!
u
The product must only be operated with
u
the protective cover mounted when the
cutting disc is used.
Fit the protective cover
o
attachment for the protective cover
the cutting discs, see "Fitting/adjusting/
removing the protective cover" and "Fitting
the attachment to/removing the attachment
from the protective cover".
Only certified, fibre-reinforced cutting discs
o
may be used.
In general, work with small scrubs. Exert
o
only moderate pressure on the workpiece.
Always work in the counter-direction. This
o
ensures that the product is not pushed out
of the cut through lack of control.
˜ Chuck key storage
The chuck key
[
]
o
handle
(fig. A).
1 ]
[
˜ Assembly
m
CAUTION! Risk of injury!
Ensure that you have sufficient space
u
in which to work, and that you do not
endanger other people.
All hoods and protective devices
u
must be assembled properly before
commissioning.
Disconnect the mains plug before
u
changing the setting on the product.
˜ Mounting the handle (fig. A)
m
WARNING!
The product must only be operated with
u
the handle
mounted.
1 ]
[
and the
9 ]
[
for
[
]
can be stowed in the
Advertenties
Hoofdstukken
Inhoudsopgave
