Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Note: The motion detector
heat radiation . When outdoor temperatures
are low, it is more sensitive to body heat than
when outdoor temperatures are warm . Be sure
to regulate the sensitivity of the sensor over the
course of the year .
˜ Setting the daylight level
Turn the rotary control LUX
o
to increase the daylight level .
In the position, the motion detector
o
reacts at night (at approx . 10 lx) .
In the
position, the motion detector
o
responds at daylight levels, as long as about
20,000 lx are not exceeded .
˜ Aligning the motion detector
Note: Perform this adjustment at twilight .
Turn the rotary control LUX
o
Align the motion detector
o
region of the desired coverage area .
Move about through the coverage area
o
until you are satisfied with the response
characteristics of the motion detector
To find the proper orientation, change the
position of the rotary control SENS
orientation of the motion detector
Note: Please note that the motion detector
o
primarily detects movements transverse to
the motion detector
towards the motion detector
detect this movement .
When you have aligned the motion
o
detector
satisfactorily then turn the rotary
[
8 ]
control LUX
to the desired position . You
14 ]
[
can determine the appropriate position of the
rotary control LUX
which the spotlight
Slowly turn the rotary control LUX
o
anti‑clockwise until the motion detector
reacts to movement within the coverage area .
responds to
8 ]
[
anti‑clockwise
[
14 ]
only
[
8 ]
also
[
8 ]
to position .
14 ]
[
into the central
[
8 ]
.
[
8 ]
or the
15 ]
[
.
8 ]
[
. If you move directly
8 ]
[
, it cannot
8 ]
[
during dawn or dusk at
14 ]
[
should react .
1 ]
[
[
14 ]
[
8 ]
˜ Cleaning and care
Before cleaning, remove the fuse or switch off
o
the circuit breaker at the fuse box .
Never immerse the product in water or
o
other liquids . Otherwise the product can be
damaged .
Clean the product with a lint‑free, slightly moist
o
cloth and mild cleaning agent .
Reconnect the fuse or circuit breaker for use
o
after cleaning .
˜ Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities .
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics/20–22: paper and
fibreboard/80–98: composite materials .
Product:
Contact your local refuse disposal
authority for more details of how to
dispose of your worn‑out product .
8 ]
[
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste . Information
on collection points and their opening
hours can be obtained from your local
authority .
˜ Warranty
The product has been manufactured to strict quality
guidelines and meticulously examined before
delivery . In the event of product defects you have
legal rights against the retailer of this product .
Your legal rights are not limited in any way by our
warranty detailed below .
GB/IE/NI
9
Advertenties
Hoofdstukken
Inhoudsopgave
