Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
_______________________________________________________________
PLEASE NOTE
Risk of damage to the key lock system
due to the application of vertical force!
Possible material damage.
Do not attach any weight to the
tab of the key!
Do not pull off the key
in a downward motion!
Insert the key
to activate.
Remove the key
to deactivate.
5.3 Height adjustment of the
product
On the Lift 2 variant, the height of the Solo Sit-to-
Stand Desk is adjusted via an electrically powered,
variable lifting mechanism.
5.3.1
Lift 2
variant
The Solo Sit-to-Stand Desk can be variably
adjusted by means of an electric motor to a height
between 650 mm and 1250 mm (Lift 2 variant).
Before first use, ensure that:
The product has been assembled correctly
■
The control panel is connected to the power lift
■
All safety instructions have been followed
■
For the power connection
Insert the mains plug into a power point
supplying 220/230 V.
5.3.2
M em ory
control panel
Four different memory positions can be entered with
the Memory control panel.
157238
Operating and adjusting
Bild 5-3: Memory control panel version
ATTENTION
Risk of damage to control panel!
Do not lean on the control
panel.
Do not place any objects on the
control panel.
Do not pour liquids over the
control panel.
Height adjustment – memory control panel
Press the appropriate "Up or Down" button
to reach the desired desk height.
=
The desktop moves up or down.
Release the "Up or Down" button.
=
The desktop stops at the desired point. The
display indicates the desk height.
Configuring memory positions
Press the "Up" or "Down" button until the
desired height is reached.
=
The display indicates the desk height (e.g.
73 cm).
Press the "SAVE" button.
Press the desired "Memory position"
button (e. g. button "2")
=
The display indicates S 2.
The display indicates the desk height after
roughly 2 seconds.
13
Advertenties
Hoofdstukken
Inhoudsopgave
