Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Noise and vibration data:
The measured values have been determined in
accordance with EN 60745. The A-rated noise
level of the tool is typically:
Sound pressure level:
Sound power level:
Uncertainty K:
Vibration values (vector total of three directions)
determined in accordance with EN 60745:
Screws:
Vibration emission value:
Uncertainty:
NOTE
►
The vibration level specified in these instruc-
tions has been measured in accordance with
a standardised measuring procedure and
can be used for equipment comparisons. The
specified vibration emission value can also
be used to make an initial exposure estimate.
WARNING!
►
The vibration level will vary according to the
use of the power tool and may sometimes
be higher than the value specified in these
instructions.
Regular use of the power tool in this way may
cause the user to underestimate the vibra-
tion. To estimate the vibration load during a
specific working period accurately, periods
during which the appliance is switched off
(or running, but not being used) must also
be taken into account. This can significantly
reduce the vibration load over the total work-
ing period.
PAS 4 A1
L
= 67.8 dB (A)
pA
L
= 78.8 dB (A)
WA
K
= 3 dB
pA/WA
a
= 0.79 m/s
2
h
K = 1.5 m/s
2
General Power Tool
Safety Warnings
WARNING!
►
Read all safety warnings and all instruc-
tions. Failure to follow the safety information
and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1. Work area safety
a) Keep your work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2. Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
GB
3
■
│
Advertenties
Hoofdstukken
Inhoudsopgave
