INSTALLATION INSTRUCTIONS
Safety instructions for the installation
Clearance
*
HI6271T: min. 60 cm
All manuals and user guides at all-guides.com
•
Th e connection must comply with national and local regulations.
•
Th e appliance must always be earthed.
•
Th is appliance may only be connected by a competent
electrical installer.
•
For the connection, use an approved cable (for example type
HO7RR) in accordance with the regulations. Th e cable casing
should be of rubber.
•
Th e connection cable must hang freely and is not to be fed
through a drawer.
•
If you want to make a fi xed connection, make sure that a multi-
polar switch with a contact separation of at least 3 mm is fi tted in
the supply line.
•
Th e worktop the hob is built into must be fl at.
•
Th e walls and the worktop surrounding the appliance must be
heat resistant up to at least 85 °C. Even though the appliance
itself does not get hot, the heat of the hot pan could discolour or
deform the wall.
•
Damage caused by incorrect connection, installation or use, will
not be covered by the guarantee.
Suffi cient all-round clearance is essential to the safe use of the hob.
Check that there is enough clearance.
cooker hood
cabinet
GB 25
side wall
hob
General