Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
In order to fully disconnect the lamp from the
power supply, the plug-in mains adapter must
be unplugged from the mains socket.
Set-up
Note: The lamp features a USB port
use this to charge mobile devices such as smartphones
and tablets.
Connect the mains plug
tion socket
.
8
Plug the plug-in mains adapter
properly installed socket.
Adjust the reflector
Your lamp is now ready to use.
Switching the lamp on / off
The following functions can be accessed by
pressing the respective button on the control
panel
:
5
ON / OFF:
Switch the reflector
CCT:
Set the desired light colour by
repeatedly pressing this button
NIGHT LIGHT
ON / OFF:
Switch light ring on / off
:
Set the desired brightness
level by repeatedly pressing
this button
B / G / W / R:
Select the desired colour by
repeatedly pressing this button
Use the rotary dimmer
brightness level on the reflector
Note: The lamp will save the last setting that was
set when it is switched off. If the lamp is disconnected
from the power supply, the settings will be lost.
Safety / Set-up / Maintenance and cleaning / Disposal
. You can
4
with the connec-
7
into a
2
.
1
on/off
1
to set the desired
6
.
1
Adjusting the reflector
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES!
Note: Only change the position of the reflector
if the lamp is turned off.
Allow the light to cool off completely.
Adjust the reflector
Maintenance and cleaning
DANGER OF ELECTRIC
SHOCK!
First remove the plug-in mains adapter
socket.
RISK OF ELECTRIC SHOCK!
For electrical safety, never clean the light with water
or other liquids, or immerse it in water.
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES!
Allow the lamp to cool down completely.
Do not use solvents, benzene or similar
substances. They could damage the light.
Only use a dry, lint-free cloth for cleaning.
Plug the plug-in mains adapter
the socket.
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
Observe the marking of the packaging
materials for waste separation, which
b
a
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
to the desired position.
1
from the
2
back into
2
GB/IE/NI
1
9
Advertenties
Hoofdstukken
Inhoudsopgave
