Advertenties
Beschikbare talen
Beschikbare talen
Trouble or fault
Product does not achieve
full power.
Drill bit does not rotate.
Drill bit is not released.
Product switches off if drill
bit jams.
Service indicator flashes.
Service indicator shows.
Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled.
The materials must be correctly separated before they can be recycled. In many countries, your old
tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti
representative for further information.
▶
Do not dispose of power tools, electronic equipment or batteries as household waste!
RoHS (Restriction of Hazardous Substances)
Click on the link to go to the table of hazardous substances: qr.hilti.com/r6851673.
There is a link to the RoHS table, in the form of a QR code, at the end of this document.
Manufacturer's warranty
▶
Please contact your local Hilti representative if you have questions about the warranty conditions.
22
Possible cause
The control switch is not fully
pressed.
The voltage provided by the
electric supply is too low.
The half-power button is en-
gaged.
The function selector switch is
not engaged or is in the "Chis-
eling" position
or the "Chisel
positioning" position
The chuck is not pulled back
fully.
Side handle not fitted correctly.
The electronic safety shut-down
has tripped to avoid further jam-
ming.
The product is faulty.
The carbon brushes are worn.
Action to be taken
▶
Press the control switch as far
as it will go.
▶
Connect the product to a
different power source.
▶
Press the "half-power" button.
▶
With the motor at a standstill,
set the function selector
switch to the "Hammer
drilling"
.
▶
Pull the tool lock back as far
as it will go and remove the
accessory tool.
▶
Disengage the side handle
and refit it correctly so that
the clamping band and side
handle engage in the recess.
▶
Release the drill bit.
▶
Have the product repaired by
Hilti Service.
▶
Have checked, and if neces-
sary replaced, by a trained
electrical specialist.
2244431
*2244431*
position.
Advertenties
