Advertenties
Beschikbare talen
Beschikbare talen
Noise information and vibration values
The sound pressure and vibration values given in these instructions were measured in accordance
with a standardized test and can be used to compare one power tool with another. They can also be
used for a preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used
for different applications, with different accessory tools, or is poorly maintained, the data can vary.
This can significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is
switched off, or when it is running but not actually being used for a job. This can significantly reduce
exposure over the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration,
for example: maintaining the power tool and accessory tools, keeping the hands warm, organization
of work patterns.
Detailed information on the versions of the EN 62841 standards applied here is to be found in
the reproduction of the declaration of conformity
Noise emission values
Sound power level (L
Uncertainty for the sound power level (K
Emission sound pressure level (L
Uncertainty for the sound pressure level (K
Total vibration
Vibration emission value for hammer drilling in concrete
(a
)
h,HD
Vibration emission value for chiseling (a
Uncertainty (K)
Operation
Preparations at the workplace
CAUTION
Risk of injury! Inadvertent starting of the product.
▶
Unplug the supply cord before making adjustments to the power tool or before changing
accessories.
Observe the safety instructions and warnings in this documentation and on the product.
Connecting the detachable supply cord
CAUTION
Risk of injury! Due to leakage current as a result of dirty contacts.
▶
Connect the detachable electric connector to the electric tool only when it is clean and dry and
when the supply cord is unplugged from the power outlet.
1.Push the keyed, detachable electric plug connector into the tool as far as it will go, until it is heard
to engage.
2.Plug the supply cord into the power outlet.
Disconnecting the detachable supply cord
1.Unplug the supply cord from the power outlet.
2.Press the release button and pull the keyed, detachable electric plug connector out of the socket.
3.Pull the supply cord connector out of the power tool.
18
)
WA
)
pA
191.
)
WA
)
pA
)
h,Cheq
2244431
111 dB(A)
3 dB(A)
103 dB(A)
3 dB(A)
8.6 m/s²
7.8 m/s²
1.5 m/s²
*2244431*
Advertenties
