Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Residual heat indicator
Warning!
The risk of burns from residual
heat!
Operating instructions
Activation and deactivation
Touch
for 1 second to activate or deactivate the ap-
pliance.
Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated
• You do not set the heat setting after you activate the
appliance.
The times of Automatic Switch Off
Heat setting
The cooking zone
deactivates after
The heat setting
Touch
to increase the heat setting. Touch
crease the heat setting. The display shows the heat
setting. Touch
and
vate the cooking zone.
Activation and deactivation of the outer rings
You can adjust the surface you cook to the dimension
of the cookware.
To activate the outer ring touch the sensor field
. The indicator comes on. For more outer rings
touch the same sensor field again. The subsequent in-
dicator comes on.
Do the procedure again to deactivate the outer ring.
The indicator goes out.
.
,
-
6 hours
to de-
at the same time to deacti-
• You spill something or put something on the control
panel for more than 10 seconds, (a pan, a cloth,
etc.). The sound operates some time and the appli-
ance deactivates. Remove the object or clean the
control panel.
• You do not deactivate a cooking zone or change the
heat setting. After some time
appliance deactivates. See the table.
-
5 hours
Automatic Heat Up
11
10
9
8
7
/
6
5
4
3
2
1
0
1
You can get a necessary heat setting in a shorter time if
you activate the Automatic Heat Up function. This func-
tion sets the highest heat setting for some time (see the
illustration), and then decreases to the necessary heat
setting.
comes on and the
4 hours
1.5 hours
2
3
4
5
6
-
7
8
9
17
Advertenties
Hoofdstukken
Inhoudsopgave
