• If necessary, the door hinge can be switched
from right to left.
• Warning! Before carrying out any work on the
appliance, always disconnect the power plug
from the mains.
• To avoid personal injury and material damage,
carry out the shift of the door hinge with two
people.
• We recommend that the door stop only be
changed by qualified persons.
• Before you start, it is fundamental that you:
ū Always pay attention to the number of wash-
ers on the trunnion and screws.
ū Always align the doors so that they close
tightly.
a) Unscrew the two screws q which secure the
appliance top w from behind.
b) As you secure the door, remove the lid w and the
upper journal e and put the lid aside.
c) Raise the door a bit and detach it from the lower
hinge. Place the door in a safe area.
d) Take out the journal holder i from the bottom
right bore of the door.
e) Tilt the device slightly backwards and unscrew
the adjustable front feet r of the appliance.
f) Unscrew the screws t which hold the bottom
door hinge y.
a) Refer to drawing B when unscrewing the journal
of the lower hinge y from the plate.
b) Turn the plate so that its underside is facing
upwards.
c) Then, replace the journal and secure it with
the nut. The newly configured lower door hinge
receives the number u.
a) Using the screws t, attach the lower door hinge
u to the bottom left side of the appliance.
b) Screw the adjustable front feet r back on the
appliance.
c) Put the entry i for the journal into the drill hole
on the bottom left of the door.
d) Place the upper journal e into the bottom left
bore of the cover w.
e) Put the door onto the journal of the lower door
hinge u and press it onto the appliance.
f) While holding the door, put the lid w in place
with the top journal e sliding into the door open-
ing.
g) Attach the lid w from behind using both screws
q.
8824_multi.indd 24
Screw
Appliance top
Upper journal
Adjustable foot
Lower bolt
Step A
Lower right-
hand hinge
Lower left-hand
hinge
Entry for journal
Step B
Step C
- 24 -
q
w
e
r
t
y
u
i
26.11.2018 11:45:55