Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Deleting a CUE mark
• The old CUE mark is deleted as soon as a new CUE mark is set.
Manual setting of the CUE mark
• To set the CUE point manually, you have to interrupt the playback at the desired point with the PLAY/
PAUSE
button (13). For precise settings, use the JOG wheel (2) and the SEARCH
and 10). The starting position of the track is automatically saved as new CUE mark.
h) LOOP Function
You can define a play loop. The starting and end point of the loop are set during playback.
• At the desired starting point of the play loop, press the IN button (6). The button is lit.
• At the desired end point of the play loop, press the OUT button (7). The IN and OUT buttons (6 and 7) flash.
• The play loop is now played continuously until the OUT button (7) is pressed again.
• A stored playback loop is indicated when the IN and OUT (6 and 7) buttons are lit. To start a saved play loop,
press the RELOOP button (8).
The existing play loop is deleted when a new play loop is programmed, after pressing the SEARCH
buttons ( 9 and 10) or after a new track is selected.
m) Synchronisation of the Playback Speed
To mix or cross-fade two signal sources cleanly, the beats have to be synchronised in many cases.
This can be achieved in three ways:
• Using the PITCH slide control (23). It allows you to permanently modify the speed. This function is used when
two tracks have two completely different tempos.
• Using buttons PITCH BEND +/- (14 and 16). This allows you to change the speed temporarily. This function is
used when two tracks have the same beat but the starting point has to be synchronised.
• Using the JOG wheel (2). By turning the wheel, you can change the speed temporarily. The speed change
depends on how quickly the JOG wheel (2) is turned. This function can also be used when two tracks have the
same beat but the starting point has to be synchronised.
PITCH slide control
• Press the PITCH button (15) to activate the PITCH slide control (21). The PITCH button (15) is lit.
• Modify playback speed by moving the PITCH slide control (21) up or down. The percentage of the speed chan-
ge is displayed. Put the slide control in centre position for original speed.
48
All manuals and user guides at all-guides.com
buttons (9
Advertenties
Hoofdstukken
Inhoudsopgave
