Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
(39) SD card input
SD card slot
(40) CD/USB/SD button
Use this button to select the playback source CD, USB or SD.
(41) CUE control (headphones)
Use the CUE control to set the volume of the headphones.
Turn the CUE control to MIN before plugging in or unplugging the headphones, before put-
ting on the headphones or before switching the device on or off. Otherwise, there is a risk of
damage to your hearing as a result of excessive volume from the headphone output.
(42) CUE connection (headphones)
Connection jack for stereo headphones (6.3 mm jack plug).
(43) MIC socket
The DJ microphone can be connected to this input. Microphones with 6.3mm jack bushes can be connec-
ted here.
(44) PHONO/LINE connection
Connection for record players or devices with LINE/CD level
This input can be used for devices with PHONO or LINE level. Be sure to observe the positi-
on of the PHONO/LINE switch (48) to avoid an incorrect setting.
(45) Mains connection AC IN
Plug in the provided mains cable here.
(46) GND Connection
To prevent buzzing, an earth connection can be made from the mixer to the earthing lines (usually a black
cable with clamp-type socket) of the record player using these screw terminals.
(47) AMP and REC OUTPUT connection
AMP: RCA connection for an amplifier with RCA input.
REC: Recording devices such as cassette decks or CD recorders can be connected to these jacks.
The signals of both outputs are controlled by the mixing console controller.
(48) PHONO/LINE switch
Use this switch to select the input sensitivity of the PHONO/LINE input (44). If a record player is connected
to the PHONO/LINE input (44), the respective PHONO/LINE switch must be set to "PHONO". If a device
with a LINE/CD level is connected to the PHONO/LINE input, the respective PHONO/LINE switch must be
set to LINE.
All manuals and user guides at all-guides.com
39
Advertenties
Hoofdstukken
Inhoudsopgave
