Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
8.2 How to fill the rinse aid
dispenser
CAUTION!
The compartment (A) is for rinse aid only.
Do not fill it with detergent.
9. DAILY USE
1. Open the water tap.
2. Press and hold
activated.
3. Fill the salt container if it is empty.
4. Fill the rinse aid dispenser if it is empty.
5. Load the baskets.
6. Add the detergent.
7. Select and start a programme.
8. Close the water tap when the programme
is complete.
9.1 Using the detergent
A
B
1. Press the release button (B) to open the
lid (C).
44
ENGLISH
A
B
A
-
+
C
D
until the appliance is
C
CAUTION!
Only use rinse aid designed specifically
for dishwashers.
1. Press the release button (D) to open the
lid (C).
2. Pour the rinse aid in the dispenser (A)
until the liquid reaches the fill level 'max'.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent excessive
foam formation.
4. Close the lid. Make sure that the release
button locks into position.
You can turn the selector of the released
quantity (B) between position 1 (lowest
quantity) and position 4 or 6 (highest
quantity).
2. Put the detergent, in powder or tablets, in
the compartment (A).
3. If the programme has a prewash phase,
put a small quantity of detergent on the
inner part of the appliance door.
4. Close the lid. Make sure that the release
button locks into position.
For information about the detergent
dosage, refer to the manufacturer's
instructions on the packaging of the
product. Usually, 20 - 25 ml of gel
detergent is adequate for washing a load
with normal soil.
Do not fill the compartment (A) with more
than 30 ml of gel detergent.
9.2 How to select and start a
programme using MY TIME
selection bar
1. Slide your finger across MY TIME
selection bar to choose a suitable
programme.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
