Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Operation
4.3.1
Run-on function
The device comes with a run-on function. If this function is
used, the device will work for a further ten minutes at the last
chosen power level.
In recirculated air mode, it is necessary to use the run-on
function so that the device can remove the remaining
odours.
If using BUF-BDL recirculated air filters:
Using the run-on function increases the life of the filter filling.
The filter filling must be replaced at regular intervals.
The run-on function is switched on manually.
Touch
Function
field
The device is switched on.
☞ Touch the touch field 1x.
y A beep sounds.
y The remote control vibrates.
y The LED illuminates for a short time.
y The run-on time starts in power level 2 and
switches off after 10 minutes.
6002782_b – 14.09.2016
All manuals and user guides at all-guides.com
If the device is equipped with JetStream technology, it is
possible to switch between extraction mode and recirculated
air mode at any time.
4.3.2
Extraction mode / recirculated air mode
changeover
Touch
Function
field
The device is switched on.
☞ Touch the touch field 1x.
y A beep sounds.
y The remote control vibrates.
y The LED illuminates for a short time.
y The device switches to recirculated air
mode.
The device is switched on.
☞ Touch the touch field 1x.
y A beep sounds.
y The remote control vibrates.
y The LED illuminates for a short time.
y The device switches to extracted air mode.
83
Advertenties
Hoofdstukken
Inhoudsopgave
