Download Print deze pagina

How To Use Surface Burners - Amica 6017GG Series Gebruikershandleiding

Advertenties

Beschikbare talen

Beschikbare talen

OPERATION

How to use surface burners

Choice of cookware
Mind that the diameter of a pan base is always
larger than the burner flame crown, and that
the pan itself is covered. The recommended
pan diameter is around 2.5 to 3 times larger
than the burner diameter, that is, for:
 an auxiliary burner – a pan with a diameter
of 90 to 150 mm,
 a medium burner – a pan with a diameter
of 160 to 220 mm,
 a large burner – a pan with a diameter of
200 to 240 mm, and the pan height should
not be greater than its diameter.
WRONG
Gas burner control knobs
*if available
All manuals and user guides at all-guides.com
RIGHT
Position
burner "switched off"
Position
"large flame"
Position
"economical
flame"
Ignition without an ignitor
 light a match,
 press in the knob to the end and turn it
left to the "large flame" position
 ignite gas with a match,
 set required flame size (e.g. "economical"
),
switch off the burner after finishing
cooking, turning the knob right (to the off
position).
Push-button
ignition*
 press the spark ignition push-button
marked with ....,
 press in the knob to the end and turn it
left to the "large flame" position
 hold down until gas has lit,
 set the required flame size (e.g. "economi-
cal"
),
 switch off the burner after finishing cook-
ing, turning the knob right (to the off
position).
Knob ignition*
 press in the knob to the end and turn it left
to the "large flame" position
 hold until gas is lit,
 after the flame is lighted release the pres-
sure on the knob and set a required flame
size.
18
,

Advertenties

Hoofdstukken

loading

Deze handleiding is ook geschikt voor:

Shgg series