Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
32
www.aeg.com
This option is automatically activated
when you select the programme
The indicator
8. BEFORE FIRST USE
1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not load the
baskets.
When you start a programme, the
appliance can take up to 5 minutes to
recharge the resin in the water softener.
It seems that the appliance is not
working. The washing phase starts only
after this procedure is completed. The
procedure will be repeated periodically.
8.1 The salt container
The salt is used to recharge the resin in
the water softener and to assure good
washing results in the daily use.
How to fill the salt container
1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt
container (Only for the first time).
3. Fill the salt container with dishwasher
salt.
CAUTION!
Do not try to close the
appliance door while the
device keeps the door ajar.
This can cause damage to
the appliance.
comes on.
CAUTION!
Only use salt specifically
designed for dishwashers.
It is not possible to select this option
with other programmes.
If you want to deactivate the option
AutoOpen, press
indicator goes off. In this condition, the
energy consumption of the programme
increases.
.
4. Remove the salt around the opening
of the salt container.
5. Turn the cap of the salt container
clockwise to close the salt container.
Water and salt can come out
from the salt container when
you fill it. Risk of corrosion.
To prevent it, after you fill
the salt container, start a
programme.
. The related
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
