Advertenties
Beschikbare talen
Beschikbare talen
Cleaning the steam system
Cleaning depends on how often you use the steam injection function and on the hardness of the water
used.
1. Insert the all-purpose deep baking tray into the 5th (top) guide level to allow the water drip into it.
2. In the extra functions menu, select descaling (dEcL). Confirm your selection by pressing on the
KNOB. Then, rotate it until Yes appears on the display unit. Confirm the selection again by
long-pressing on the KNOB. The descaling process is started, and it cannot be terminated or
cancelled.
3. Fill will appear on the display unit. Add limescale remover into the water tank. Confirm the setting
by long-pressing on the KNOB.
4. Descaling in progress.
5. When the process is complete, the sign Fill will reappear on the display unit. Pour fresh water for
rinsing into the water tank. Confirm the setting by long-pressing on the KNOB.
6. After the rinsing process, End will appear on the display unit.
7. Remove the baking tray with water from the oven and wipe the oven dry if necessary.
INFORMATION!
If you do not wish to clean the steam system in the moment when proposed by the oven, this
can be terminated by selecting OFF. You may cancel the descaling program up to three times.
After that, the oven will disable the operation of the steam function.
Removing wire and fixed pull-out (extendible) guides
40
A
Hold the guides by the bottom side and
pull them towards the center of the oven cavity.
B
Remove them from the openings at the top.
INFORMATION!
When removing the guides, take care not
to damage the enamel coating.
Advertenties
