Advertenties
Beschikbare talen
Beschikbare talen
Switching on for the first time
After connecting your appliance or after an extended power outage, 12:00 will flash on the display.
First, choose and confirm the following basic settings.
INFORMATION!
Change them by rotating the KNOB. To confirm the desired setting, press the KNOB or touch
the
key.
After you confirm the selected settings, the clock will appear on the display unit. The appliance is in
standby mode.
Testing water hardness
Cleaning of the steam system depends on both frequency of baking with steam injection and on the
hardness of the water used.
Soak the test paper strip (supplied with the appliance) in water for one (1) second. Wait one minute,
then note the number of stripes on the paper.
Setting the hardness level
•
4 green stripes Hrd 1
•
1 red stripe Hrd 2
•
2 red stripes Hrd 3
•
3 red stripes Hrd 4
•
4 red stripes Hrd 5
14
1. CLOCK SETTING
Set the clock/time of day. First, set and confirm the minutes; then set
and confirm the hours.
INFORMATION!
To set or adjust the clock later on, see chapter Extra functions.
2. ACOUSTIC SIGNAL VOLUME
Medium volume is the default setting. The sign VoL and the currently set
value for the acoustic signal volume will appear on the display unit. Rotate
the KNOB to increase or decrease the key volume.
3. DISPLAY DIMMER
Medium light intensity is the default setting. The sign brht and the
currently set value for the display light intensity will appear on the display
unit. Rotate the KNOB to increase or decrease lighting intensity.
number of coloured bars on the strip:
Advertenties
