Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Mounting the product
on a cupboard
Note: Thoroughly clean the surface
on to which you intend to install the
product. The surface must be clean,
dry and free of grease. Otherwise
the self-adhesive foil may not stick
properly.
1. Using a pencil, mark the position
on the wall on to which you
intend to attach the LED light
strip
spirit level as a guide.
2. Stick the double-sided adhesive
tape onto the LED light strip
Then pull the paper from the
self- adhesive foil on the back of
the LED light strip
3. Position the self-adhesive foil on
the markings and press to fix it
firmly into place (Fig. D).
4. Connect the LED light strip
to the mains adapter
or connect the LED light strip
to the connection lead
1
connect it to an additional light
(Fig. B).
Mounting the product
on a wall
1. Drill the fastening holes (Fig. E).
CAUTION! Ensure that you
do not damage any cables in
the wall.
. If necessary, use a
1
.
1
(Fig. F)
8
2
GB/IE/NI
.
1
1
to
13
Advertenties
Hoofdstukken
Inhoudsopgave
