Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ITEMS SUPPLIED
EN
•
Cooling device 1 x
•
Remote control 1 x
•
Operating instructions 1 x
Check the items supplied for completeness and the components for transport damage. If
you find any damage, do not use the device but contact our customer service department.
Remove any possible films, stickers or transport protection from the device. Never
remove the rating plate and any possible warnings!
To use the remote control, you also require two 1.5 V batteries, AAA.
These are not supplied with the device.
AT A GLANCE
1.
Cover of the filler opening
2.
Control panel
3.
Ventilation grille (adjustable)
4.
Honeycomb filter
5.
Honeycomb filter cover
6.
Water level indicator
7.
Drain plug
8.
Castor lock (ON / OFF)
9.
Castor
10. Water tank
11. Closure clasp for water tank
12. Air inlet
13. Housing
14. Air outlet
15. Lever for adjusting the ventilation grille
16. Recessed grip
17. Water tray
8
1
17
2
16
15
3
14
13
4
12
5
11
6
10
7
8
9
18
19
20
18. ION field
21. Display
19. TIMER field
22. SPEED field
20. INTERVAL field
23. SWING field
FUNCTIONAL OVERVIEW OF THE OPERATING ELEMENTS
The control lamps above the respective control fields indicate which functions have been
activated.
Control Panel
ION (18)
Activate / deactivate air cleaning. If this function is active, negatively charged ions which
bind dirt particles from the air are released.
TIMER (19)
Activate / set / deactivate timer
The device has a 24-hour timer. You can adjust this by repeatedly touching the TIMER
field (1 to 24 – Off). When the timer is active, the setting appears alternately with the
speed level on the display (21).
INTERVAL (20)
Activate / deactivate interval mode. When this function is active, the device switches to an
interval mode. This is where the device operates on each speed level for 20 seconds and
then switches it automatically. The mode starts with the speed level which is set at the
time of activation and then circulates downwards through all levels.
Example: P1 > P3 > P2 > P1 > P3 > ...
SPEED (22)
Set the speed level. The fan of the device has 3 speed levels. You can set them by
repeatedly touching the SPEED fi eld. The setting appears on the display (P1 – P2 – P3).
21
22
23
24
25
24. COOL fi eld
25. POWER field
EN
9
Advertenties
Inhoudsopgave
