Advertenties
Beschikbare talen
Beschikbare talen
4.5
Resistance measurement
WARNING: To avoid electric shock, disconnect power to the unit
under test and discharge all capacitors before taking any
resistance measurements. Remove the batteries and unplug the
line cords.
1.
Set the function switch to the green
2.
Insert the black test lead banana plug into the negative COM jack
3.
Insert the red test lead banana plug into the positive Ω jack
4.
Press the MODE button to indicate "Ω" on the display
5.
Touch the test probe tips across the circuit or part under test
6.
It is best to disconnect one side of the part under test so the rest of the
circuit will not interfere with the resistance reading
7.
Read the resistance in the display
40
www.nieaf-smitt.com
position
Advertenties
Hoofdstukken
