Advertenties
Beschikbare talen
Beschikbare talen
4.2
AC voltage (frequency, duty cycle) measurement
CAUTION: Do not measure AC voltages if a motor on the circuit is
being switched ON or OFF. Large voltage surges may occur that
can damage the meter.
1.
Set the function switch to the green V/Ω/Hz/% position
2.
Insert the black test lead banana plug into the negative COM jack
3.
Insert red test lead banana plug into
the positive V jack
4.
Touch the black test probe tip to the
neutral side of the circuit
5.
Touch the red test probe tip to the
"hot" side of the circuit
6.
Read the voltage in the display
37
www.nieaf-smitt.com
Advertenties
Hoofdstukken
