Download Print deze pagina

Nieaf-Smitt NI 64 Handleiding pagina 30

Advertenties

Beschikbare talen

Beschikbare talen

This symbol indicates that a device is protected throughout by
double insulation or reinforced insulation.
General
Use this multimeter only as specified in this manual to prevent
damage to the multimeter
Always use proper terminals, switch position and range for
measurements
Verify the meter's operation by measuring a known voltage, if in
doubt, have the meter serviced
Do not apply more than the rated voltage, as marked on the
meter, between terminals or between any terminal and earth
ground
Do no apply more than the rated voltage, as marked on the
multimeter, between terminals or between any terminal and
earth ground
Only replace the blown fuse with the proper rating as specified in
this manual
Use caution with voltages above 30 VAC RMS, 42 VAC peak, or 60
VDC. These voltages pose a shock hazard
To avoid false readings that can lead to electric shock and injury,
replace battery as soon as low battery indicator
Disconnect circuit power and discharge all highvoltage capacitors
before testing resistance, continuity, diodes, or capacitance
Do not use meter around explosive gas or vapor
30
www.nieaf-smitt.com

Advertenties

Hoofdstukken

loading