Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Not enough detergent has
been used or it is unsuitable.
The spray arms are clogged.
The filters are not clean or
not in the correct position.
Cloudiness on
Combination of soft water
glassware
and too much detergent
White spots
appear on
Hard water area can cause
dishes
limescale deposits.
and glasses
Black or grey
Aluminium utensils have
marks on
rubbed against dishes.
dishes
Detergent left
Dishes block detergent
in dispenser
dispenser
Improper loading
Dishes are removed
too soon
The dishes are
not quite dry.
Wrong program has been
selected.
Use of cutlery with a
low-quality coating
Use more detergent or change the detergent.
Rearrange the items so that the spray arms can
rotate freely.
Clean and/or position the filters correctly.
Use less detergent if you have soft water and
select a shorter cycle to wash the glassware and
to get them clean.
Check water softener settings or fill status of salt
container.
Use a mild abrasive cleaner to eliminate those
marks.
Re-loading the dishes properly.
Use gloves if detergent residue can be found on
dishes to avoid skin irritations.
Refer to "Loading the Dishwasher".
Do not empty your dishwasher immediately after
washing. Open the door slightly so that the steam
can come out. Take out the dishes until the inside
temperature is safe to touch. Unload the lower
basket first to prevent the dropping water from
the upper basket.
Choose a program with long washing time.
Water drainage is more difficult with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
EN-27
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
