Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Changing the program in progress
A wash cycle can only be changed if it has been running for a short time otherwise, the detergent may
have already been released and the dishwasher may have already drained the wash water. If this is the
case, the dishwasher needs to be reset and the detergent dispenser must be refilled. To reset the
dishwasher, follow the instructions below:
1. Open the door a little to stop the washing. After the spray arms stop working, you can open the door
completely.
2. Press and hold
for more than 3 seconds – the program will be cancelled. You will hear a beep.
3. Repeatedly press
4. Close the door to start the program.
USAGE COUNTER
When the power cord is connected, but the dishwasher is not turned on,
for 5 seconds, the dishwasher display will show the number of cycles.
0
6
appears
for 2
seconds
then
appears
32
Example:
0 is displayed for two seconds, then 32 is displayed for two seconds, and then the display turns off.
6
A total of 632 cycles were completed.
9 is displayed for two seconds, then 80 is displayed for two seconds, and then the display turns off.
0
A total of 9080 cycles were completed.
Auto open
To select this function, press
illuminate.
This function can only be used with
After washing, the door will open automatically to achieve better drying results.
NOTE !
The dishwasher door must not be blocked when set to open automatically. This can disrupt door lock
functionality.
to select a new program.
+
and the indicator light on this button will
open the door,
9
0
appears
for 2
seconds
then
appears
80
, Glass and 90 min.
EN-22
press and hold
+
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
