Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
USING THE WATER SOFTENER
The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will
be formed on the utensils. This appliance is equipped with a water softener which uses a salt specifically
designed to eliminate the minerals from the water.
CAUTION:
Only use salt specially formulated for domestic dishwashers.
Do not use table salt as it contains insoluble substanes which may damage the water softening
system.
Fill the salt container before starting the washing program. In this way, the excess saline solution
will be immediately removed by the water; the prolonged presence of salt water inside the tank may
lead to corrosion.
Adjusting the salt consumption
1. Open the door and switch on the appliance.
2. Enter the status of adjusting the salt consumption by holding down
setting flashes on the display.
3. Repeatedly press
4. Press
to validate settings.
WATER HARDNESS
°dH
°fH
0 – 5
0 – 9
6 – 11
10 – 20
12 – 17
21 – 30
18 – 22
31 – 40
23 – 34
41 – 60
35 – 55
61 – 98
NOTE:
1 °dH=1.25 °Clarke= 1.78 °fH= 0.178 mmol/l
°dH: German degree
Filling with salt
The salt container must be refilled when the salt warning light
to adjust the setting to suit the water hardness.
°Clarke
Mmol/l
0 – 6
0 – 0.94
7 – 14
1.0 – 2.0
15 – 21
2.1 – 3.0
22 – 28
3.1 – 4.0
29 – 42
4.1 – 6.0
43 – 69
6.1 – 9.8
°fH: French degree
°Clarke: British degree
Display
H1
H2
H3
H4
H5
H6
illuminates.
EN-17
until the value "H3" (factory
Salt consumption
(gram / cycle
0
9
12
20
30
60
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
