Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Filling the rinse aid dispenser
Remove the rinse aid dispenser cap by
lifting up the tab.
Close the cap.
Adjusting the rinse aid dispenser
To achieve a better drying performance with limited rinse aid, the dishwasher is designed to adjust the
consumption by user. Follow the below steps:
1. Open the door and switch on the dishwasher.
2. Within 60 seconds after powering on the dishwasher, press and hold
then
press
to enter the setting mode.
The display will show d3.
3. Repeatedly press
4. The setting will be confirmed if there is no operation
in about 5 seconds.
Filling the detergent dispenser
1
Slide the control to the
right to open the
detergent cap.
to select the proper setting.
2
Add the detergent into
the compartment.
Pour the rinse aid into the dispenser, being
careful not to overfill.
Display
EN-19
for about 5 seconds and
Amount of
rinse aid (mL
d1
1,2
d2
2,4
d3
3,6
d4
4,8
d5
6,0
3
Close the cap by
sliding it to the front
and pressing it down.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
