Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1. Remove the lower basket and unscrew the cap from the salt container.
2. Place the end of the funnel (supplied into the hole and pour in about 1.5kg dishwasher salt.
3. Fill the salt container to its maximum limit with water.
It is normal for small amount of water to come out of the salt container.
4. Screw back the cap tightly.
5. Remove any salt that has fallen around the opening of the container and into the tub.
WARNING !
Salt is corrosive, it is strongly recommended to run a shortest program without dishes after each salt
container filling to wash away any salt that may have been spilled into the tub.
NOTE: Depending on how well the salt dissolves, the salt warning light
the salt container is filled.
USING THE RINSE AND DETERGENT DISPENSERS
Function of the rinse aid
The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes,
which can leave spots and streaks. It also improves drying by allowing water to roll off the dishes.
WARNING! Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any other
substances (e.g. Dishwasher cleaning agent, liquid detergent. This would damage the appliance.
Function of the detergent
The chemical ingredients that compose the detergent are necessary to remove, crush and dispense all
dirt out of the dishwasher.
WARNING!
Proper use of detergent
Use only detergent specifically made for dishwasher use. Keep your detergent fresh and dry.
Do not put powdered detergent into the dispenser until you are ready to wash dishes.
Dishwasher detergent is corrosive! Keep it out of the reach of children.
EN-18
may still be on even though
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
