Download Inhoudsopgave Inhoud Print deze pagina

Setting Mode - Zanussi ZDLN6531 Gebruiksaanwijzing

Verberg thumbnails Zie ook voor ZDLN6531:
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

setting, a dedicated letter is displayed. The
dedicated letters are indicated in the table.
The order of the basic settings presented in
the table is also the order of the settings in

setting mode.

7.1 Setting mode
How to enter setting mode
You can enter setting mode before starting a
programme. You cannot enter setting mode
while the programme is running.
To enter setting mode, press and hold
simultaneously 30 min and ECO for about 3
seconds.
• The lights related to 60 min, 90 min
and 160 min are on.
• The display shows the current value of
the first available setting.
How to navigate in setting mode
You can navigate in setting mode using
programme buttons.
A
A. Previous button
B. OK button
C. Next button
Use Previous and Next to switch between
the basic settings and to change their value.
Use OK to enter the selected setting and to
confirm changing its value.
Water hardness
German de‐
French de‐
grees (°dH)
grees (°fH)
47 - 50
43 - 46
38
ENGLISH
B
C
mmol/l
84 - 90
8.4 - 9.0
76 - 83
7.6 - 8.3
How to change a setting
Make sure the appliance is in setting mode.
1. Use Previous or Next to select the
desired setting.
The display shows the current setting value
(a digit and the dedicated letter).
2. Press OK to enter the setting.
The current setting value flashes.
3. Press Previous or Next to change the
value.
4. Press OK to confirm the setting.
• The new setting is saved.
• The appliance returns to the basic
settings list.
5. Press and hold simultaneously 30 min
and ECO for about 3 seconds to exit
setting mode.
The appliance returns to the programme
selection.
The saved settings remain valid until you
change them again.
7.2 The water softener
The water softener removes minerals from
the water supply, which would have a
negative effect on the washing results and on
the appliance.
The higher the content of these minerals, the
harder your water is. Water hardness is
measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in your
area. Your local water authority can advise
you on the hardness of the water in your
area. Set the right level of the water softener
to assure good washing results.
mg/l (ppm)
Clarke de‐
grees
835 - 904
58 - 63
755 - 834
53 - 57
Water softener
level
10
9

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Inhoudsopgave