Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
9. Connection
a) Connecting the Outputs
Before connecting the device, ensure that the mains plug is disconnected.
Turn off all units that are to be connected and disconnect them from the mains supply.
Please observe the manufacturers' installation and safety instructions of all other devices that
are to be connected together.
For cabling, use only suitable cinch or USB lines. In case of doubt, consult an expert.
To avoid distortion or mismatched connections which could damage the record player, connect
only cinch outputs to cinch inputs.
Also observe the values stated under "Specifications".
• The record player has a built-in phono pre-amplifier and so it can be connected to devices with or without
a phono input. The PHONO/LINE (23) switch switches the built-in phono pre-amplifier on and off.
Put the PHONO/LINE switch in the PHONO position if record player is connected to a phono input.
Put the PHONO/LINE switch in the LINE position if record player is connected to a line-in input.
• Connect the R/L connection to the input of the subsequent mixer/amplifier.
Connect the record player's white cinch socket to the left channel.
Connect the record player's red cinch socket to the right channel.
• Connect the USB socket (22) to a free USB port of your computer.
34
Advertenties
Hoofdstukken
Inhoudsopgave
