Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
• Make electrical mains terminal free of voltage.
• Install correctly to give shock protection.
• Loose and incorrect plug and socket connections can make the terminal become too hot.
• A qualified electrician must install the connections in the clamps correctly.
• Use a strain relief clamp on cable.
• Use the correct mains cable of type H05BB-F Tmax 90°C (or higher) for a single phase or
two phase connection.
• Replace the damaged mains cable with a special cable (type H05BB-F Tmax 90°C; or
higher). Speak your local Service Centre.
The appliance must have the electrical installation which lets you disconnect the appliance
from the mains at all poles with a contact opening width of minimum 3 mm.
You must have correct devices to isolate: line protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips and contactors.
Assembly
R 5
mm
490
600
mm
680
+1 mm
+1 mm
min.
25 mm
min.
min.
5 mm
20 mm
Installation instructions
min.
500mm
min.
50mm
23
min.
50mm
min.
5mm
min.
38 mm
min.
5 mm
Advertenties
Hoofdstukken
Inhoudsopgave
