Download Inhoudsopgave Inhoud Print deze pagina

Dispensing Of Hot Water; Dispensing Of Steam; Cleaning And Maintenance; General Cleaning - ECM Manufacture Technika IV Handleiding

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

6.4 Dispensing of hot water

1
Place an adequate water container (with a heat-insulated handle) under the hot water dispenser. After having
moved the power switch off (position 0), you can dispense water (e. g. for tea) by opening the hot water lever.
2
After dispensing water, switch the machine on (position 1) again. The boiler will be filled with fresh water
automatically.
When the machine is switched off, more hot water can be dispensed.
However, one does not necessarily have to switch off the machine for dispensing hot water.
Caution!
Place the nozzle of the dispenser into the water container in order to avoid injuries due to hot water
spillage.

6.5 Dispensing of steam

The MECHANIKA / TECHNIKA is able to generate large amounts of steam in order to heat or froth beverages, e. g.
milk or punch. It is a professional and compact espresso coffee machine with an enormous steam volume. Therfore,
within a few seconds you can prepare milk froth. Please pay attention to the instructions below. Do not bring the
milk to a boil, otherwise frothing milk will not be possible.
1
Important: In order to get the best result when frothing milk, open the steam lever for approx. 5 seconds to
release the condensation water in the pipe.
2
Immerse the steam nozzle (at the end of the steam dispenser) in the liquid.
3
Re-open the steam handle / steam lever.
4
Heat and/or froth the liquid.
5
After frothing or heating, release the steam into the drip tray to keep the holes of the steam nozzle clean.
Risk of injury
Always keep the steam nozzle underneath the surface of the liquid while heating or frothing in order
to avoid being sprayed.
Important
After every application clean the steam nozzle and the steam dispenser with a non-abrasive, damp
cloth; to remove possible liquid residues.
Risk of injury
Avoid skin contact with the steam dispenser while cleaning!
7

CLEANING AND MAINTENANCE

Regular and accurate care is very important for the performance, the longevity and the safety of your machine.
Caution!
Always switch off the machine (power switch in lower position), disconnect the power cord and let the
machine cool down to room temperature (for at least 30 minutes) before cleaning.

7.1 General cleaning

Daily cleaning:
Portafilter, filters, water tank, drip tray, drip plate of the drip tray, measuring-spoon and tamper require daily
cleaning. Clean with warm water and/or with a food safe detergent.
Clean the shower screen and the group gasket in the lower part of the group and remove visible deposits without
dissasembling the parts.
Instruction manual MECHANIKA · TECHNIKA
27
ENGLISH

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Mechanika iv82044850448227485274

Inhoudsopgave