Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
if necessary.
Switch radio signal reception off and on
You can switch off the radio reception permanently.
•
Press and hold the +|MEM/RF button
neously for a few seconds until only the waves of the radio symbol
manently displayed. The base station is now no longer searching for and receiving
the DCF77 radio signal.
You can turn on the radio reception again.
•
Press and hold the +|MEM/RF button
same time for a few seconds until the radio symbol
base station can receive the DCF77 radio signal again.
Restart/stop radio signal reception
You can manually restart the radio signal reception.
•
Press and hold the -| RCC
flashes. The base station searches for and receives the DCF77 radio signal. If the
reception is successful, the radio symbol
time
, date
You can stop the radio signal reception.
•
While receiving the radio signal (radio symbol
-| RCC button
radio signal reception is terminated.
Manually adjust outdoor/pool sensor
•
Open the battery compartment
•
Unscrew the funnel cover
•
Press and hold the +|MEM/RF button
flash in each reception area OUT and POOL TEMP.
•
In addition, press the TX button
on the pool sensor to transfer the measurement data from the sensors to the
main station. The red control led
•
Tighten the funnel cover
button for a few seconds until the radio symbol
and day of the week
for a few seconds. The radio symbol
of the outdoor sensor.
of the pool sensor and remove it.
on the outdoor sensor and/or the TX button
/
again.
- 18 -
and the -| RCC button
and the -| RCC button
disappears completely. The
appears permanently and the correct
are automatically set.
flashes), press and hold the
disappears and the
on the base station, the icon
lights up briefly.
simulta-
are per-
again at the
will
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
