Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3.2
Log in
If you already have an account, you can log in with your details.
A.
Click on ''Log in''.
B.
Enter your country, email address and password.
C.
Check the box next to the Privacy Policy and User Agreement. Press ''Log In''.
D.
Now you are logged in and ready to use the ELRO Baby Monitor.
If you have forgotten the password of the account, you can reset the password by clicking on
'Forgot password' in the login screen. This will allow you to request a verification code to
change the password.
Please note! You can log in to multiple smartphones using the same account to use the baby
monitor. Image quality and speed may decrease when the image is viewed with multiple
devices at the same time.
3.3
Pairing Camera with Smartphone
1
Plug the camera into the wall socket. If the plug is already inserted then remove the plug,
wait a 1 minute and then insert the plug again. Wait until the camera says 'Camera
activated'.
2
Press the ''+'' in the top right corner or press the 'Add device'' button.
3
Select the ''BC4000''.
4
Press and hold the "Pair" button on the bottom of the camera for approx. 5 seconds until the
camera says: "Reset successfully".
5
After 10-20 seconds, 'Camera activated' will be heard again and the night light will flash. The
baby monitor will repeatedly say: "Scanning mode is active". This means that the camera is in
pairing mode.
a
Note: the camera will be temporarily out of range on the included monitor.
6
Check the box and press ''Next''.
7
You will then be asked to enter the Wi-Fi network. When the location service is enabled, the
network to which the smartphone is connected is automatically filled in and only the
password needs to be entered. Press ''Next''.
8
A QR code will appear on the smartphone. Hold this QR code approx. 20 cm in front of the
camera lens so that the camera can read the QR code.
9
When ''Scan succeeded'' is heard, you can press "Scan successful" in the app.
10
The camera is automatically registered on the server and added to the app. You will
automatically see when the camera has been added. Optionally, change the name, if desired.
This can be adjusted at a later time. Press ''Continue''.
11
The camera will be active on the monitor again and the night light will continue to flash.
12
The camera is added when the camera's light is turned off and will immediately show live
images.
- 15 -
Advertenties
Inhoudsopgave
Probleemoplossen
