Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2.4
Split screen and automatic switching between camera images
If 2 cameras are added to the monitor, it is possible to view the images in split screen. It is
also possible to switch the image of the monitor between the different cameras every 10
seconds.
Split screen
1
Add an additional camera as described in 2.1 "Pairing the Monitor and Camera".
2
Press the bottom left of the main screen to go to split screen.
In this screen it is possible to view the images from both cameras. It is also possible to switch
between the sound recorded by the cameras. To do this, press the symbol 'Automatic
camera image switching', see 1.5 ''Monitor symbols dual screen''. If you press on one of the
images, the monitor will only show the image from that camera.
Automatic switching between camera images (SEQ)
You can have the camera images automatically switched by clicking on the images with the
tick in the split screen overview at the bottom left. The image shown by the monitor will then
change every 8 seconds. The letters SEQ can be seen in the lower right corner.
2.5
VOX mode
VOX is the abbreviation of 'Voice Activated Transmission'. When this feature is enabled, the
monitor will turn on when there is actual sound in the baby's room.
Action:
VOX mode kicks in when the monitor is in standby (power-saving mode). When sound is
detected, the image of the camera in question will be displayed. Of course, the sound will
also be audible, provided that the volume on the monitor is turned on.
When two cameras are used, the image will automatically switch if sound is detected by the
other camera.
It is possible to enable the VOX mode per camera. In addition, you can also adjust the
threshold of the detection. If it is set to 'high', the monitor will be switched on when there is
little noise.
2.6
Battery management
It is important that the screen can be used for a long time, without having to be charged. This
way, its mobility will be increased and you can always keep an eye on your child. With
normal use, the battery of the screen should last around 6-8 hours. In addition, we have a
few more tips to help you extend the baby monitor's battery life.
•
Switch on automatic energy-saving mode. See chapter 2.3 point 3
•
Switch on VOX mode so that the display is activated only when sound is detected. When the
sensitivity is set to 'Low', the display will activate even less quickly.
- 12 -
Advertenties
Inhoudsopgave
Probleemoplossen
