Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2.1
Pairing the Monitor and Camera
The monitor and camera are already paired. Only if you want to use an extra camera does it
need to be paired, act as follows:
1.
Turn on the monitor and camera.
2.
Touch the screen and press the button in the bottom left corner of the monitor to open the
menu.
3.
Press the icon to change the camera's settings.
4.
Press the icon and select the camera channel you want to pair the camera with.
5.
Within the 30-second countdown period, shortly press the [RESET] button (bottom of
camera).
6.
If the monitor has successfully paired the camera, it will automatically switch to the display
of this camera.
2.2
Controls
Tapping anywhere on the screen will bring up the control keys.
1.
Menu page: Here you can make monitor and camera settings.
2.
Volume up and down.
3.
Zoom mode: Tap to centrally zoom in to 1.5x or 2x.
4.
Press the icon to activate 1 of the 3 lullabies. Press the number or "All" (all 3) to play them in
the room where the camera is located. Tap the musical note to turn off the lullaby. Note!
The lullaby will not turn off automatically.
5.
Navigation controls to remotely rotate (left/right) or tilt (up/down) the camera.
- 10 -
Advertenties
Inhoudsopgave
Probleemoplossen
