Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
To ensure optimal product usage and prevent accidents, please thoroughly review this manual
before installing and using the product. It is imperative to strictly adhere to the instructions
for your safety and proper operation of the salt chlorinator. Failure to heed safety warnings
could result in severe consequences including serious injury, property damage, and even life-
threatening situations.
General
• Installation personnel must carefully review this manual before proceeding with installation.
In case of any improper or mistaken operation, please contact your supplier.
• This appliance is not intended for use by individuals (including children) with reduced
physical, sensory, or mental capabilities, or lack of experience and knowledge, unless
supervised or instructed by a responsible person regarding its safe use.
• Improper installation can create an electrical or chemical hazard, which can result in serious
injury.
• Always wear safety gloves and safety glasses when working on the installation.
• If you are not familiar with the pool filter system and dosing equipment:
O Read the entire installation and operating instructions before using the dosing
equipment.
O Only a qualified installer, centre, individual or an authorized dealer can repair this
product.
O never modify anything without consulting your supplier, professional pool
contractor.
O In the event of damaged parts, only use original replacement parts. Failure to do so
will void your warranty.
• Maintenance and operation should be performed according to the recommended time and
frequency, as stated in the manual.
• Do not install the device in an area where the electronic components of the chlorinator may
be damaged by moisture or rain.
• It is recommended to install the water treatment unit in a bypass configuration.
• Keep the installation and chemicals out of the reach of children. Always wear safety gloves
and goggles when working on the installation.
• In case of damaged parts, it is preferable to purchase replacement parts from the
manufacturer. Use only original standard parts. Failure to do so will void your warranty.
Electrical
• Please disconnect all power supplies during installation.
• The electrical installation should be done in such a way that:
O The electrolysis and acid pump cannot operate if the filter pump is not working.
This can be done by adding a flow switch/flow controller ZWMX3552-P to
installation or by using the same power line as the filter pump.
O The electronics, the unit or part of the unit must NEVER be connected to an output
of a frequency converter or frequency regulator
SAFETY
the
3
Advertenties
Hoofdstukken
Inhoudsopgave
